Call Us Today!
Roofing in Taren Point is mostly commercial. It is the Shire’s main industrial and trade precinct, sitting on the Georges River across from Sans Souci, so the stock is warehouses, factory units and showrooms with large metal and membrane roofs and concealed box gutters, alongside a pocket of homes. On the water, salt also shortens the life of fixings and gutters.
These roofs fail differently from suburban ones: it is membrane laps, box gutters and plant flashings that leak, not slipped tiles. We work on both the commercial stock and the local homes, with written scope and fixed pricing.
Most Taren Point leaks are on large roofs: a failed membrane lap, a blocked or rusted box gutter, perished flashing around plant, or a corroded sheet lap in the salt air. We find the real entry point and repair it to grade.
A Taren Point re-roof is usually a big one: long-run COLORBOND or reinforced membrane over a warehouse span, with box gutters and overflows to code, specified for Georges River salt. Removal and install included.
Large flat roofs and concealed box gutters are why Taren Point buildings need scheduled maintenance. We clear gutters, sumps and rainheads, reseal membrane laps and plant flashings, and check sheet fixings for salt corrosion.
Fitouts, rooftop plant, new units and extensions run through Taren Point roofs. We work with your builder or facility manager and detail every upstand, flashing and membrane junction to Australian Standards, specified for the exposure.
A Taren Point report covers membrane condition, box gutters and sumps, plant flashings, and sheet fixings for salt corrosion. Photos, condition ratings and a clear split between urgent and planned works for facility managers.
Box gutters on Taren Point warehouses shed a lot fast and rust in salt air. We renew soles and sumps in the correct grade, size drainage to the catchment, and make sure a working overflow spills outside, not into the building.
Commercial roofing rewards knowing how a membrane is lapped and terminated, how a box gutter overflow is set out, and how to seal around plant. On the Georges River, matched corrosion grade matters too. We get both right.
Large warehouse spans, rooftop plant and height make Taren Point roofs demanding to work on safely, often on occupied, trading sites. Every job has edge protection and anchor points. Crew certified and fully insured.
We hold trade access to reinforced commercial membranes, long-run COLORBOND and the right flashings and fixings, specified for the Georges River exposure, so the roof is built for the span and the salt, not whatever is handy.
On a Taren Point building, water under a membrane or behind a box gutter damages stock and fitouts across tenancies long before a stain shows. A proper repair beats repeat callouts. We advise honestly on replacement.
The pocket of homes around Taren Point gets the same care as the warehouses: tile and metal repairs, rebedding and repointing, re-roofs in Colorbond, and gutter renewal in matched corrosion grade for the riverside exposure.
Warehouses, factory units, showrooms and trade premises across the Taren Point industrial precinct. We schedule around operations, manage access on active sites, and work with the membrane, metal and box gutter systems in use.
Southerly gales lift sheeting and downdraft wind peels back warehouse roofs in Taren Point. We repair storm damage, failed membranes and blocked drainage, then make permanent repairs, photographing it for the claim.
Tile turns up on the Taren Point homes rather than the warehouses. We repoint ridge and hip capping with flexible pointing, replace broken and slipped tiles from matched stock, and renew rusted valley irons before they perforate.
Long-run COLORBOND is the workhorse at Taren Point: fast over a warehouse span and specified in Ultra where river salt warrants. We install and repair it with fixing density for the exposure and flashings detailed at every penetration.
Flat and low-slope membrane roofs dominate Taren Point's commercial stock. A big flat area that ponds finds its weakest lap, so we install and repair membrane with genuine falls, accessible outlets, and sealed upstands and penetrations.
We start with a detailed consultation and roof inspection. Our team reviews your needs, assesses the roof condition, and clearly explains possible solutions.
You’ll receive a transparent proposal with recommended solutions, material options, and a clear timeline — no jargon, just what you need to decide.
Once approved, our licensed team completes the work according to the scheduled timeline. Most roof replacements finish within 3–7 days, with quality and safety at the core.
After finishing, we inspect the roof with you, ensure everything meets expectations, and leave your site spotless. We also share tips for ongoing care.
Our Managing Director, Tom Stephens, brings over two decades of roofing expertise. Every project benefits from this leadership, ensuring work is completed to the highest standard.
We are fully licensed and insured, with all trades carrying certifications in working at heights, asbestos awareness, and elevated work platforms. Safety is never compromised.
Winners of the Australian Small Business Champion Awards 2024 and recognised finalists in local business awards, we are proud of our industry recognition.
We back our work with a two-year workmanship guarantee, an additional five years for new builds and replacements, plus manufacturer warranties on all materials.
Tomkat Roofing has spent over twenty years on Sydney roofs, including the industrial and warehouse roofs of Taren Point on the Georges River. We are a licensed, insured team and winners of the 2024 and 2025 Australian Small Business Champion Awards in the roofer category.
Every job starts with a proper inspection and ends with a written scope and fixed pricing. Where corrosion grade or a membrane spec applies, we set it out in the quote rather than leaving you to find out later.
Signs like leaks, sagging, missing tiles, or water stains often indicate the need for repair. However, if your roof is over 20 years old or has widespread damage, a full replacement may be more cost-effective.
Yes, we are fully licensed and insured, giving you confidence that all work is carried out to Australian standards and safety regulations. Our team is committed to delivering high-quality roofing services.
The timeline depends on the size and complexity of the roof, weather conditions, and the materials used. Most residential roof replacements take between 2 to 5 days. We’ll provide a clear timeline before the work begins.
Absolutely. We stand by the quality of our materials and workmanship. All our roofing work comes with a workmanship guarantee, and we use materials that are backed by manufacturer warranties.
© 2026 Tomkat Roofing. All Rights Reserved.
